Showing posts with label 3D Printing. Show all posts
Showing posts with label 3D Printing. Show all posts

Tuesday, February 3, 2015

B4: Group B- Grigorios Papadourakis


3D Printing & Construction

Group Members:
Grig Papadourakis
Rikki Moore
Taylor Castonguay

Deliverables:
The main deliverable of our project will be a comprehensive research paper that looks into 3D printing of concrete and its capabilities & potential for the future. The format of the paper will follow the general outline below:

  • Abstract
    • Summation of our research findings & conclusions.  
  • Introduction
    • Introduce project & identify 3-D Printing of building materials such as concrete.
  • History
    • Brief history of general 3-D printing and how it has advanced over time.
  • Technological aspects of 3-D printing concrete.
    • Rikki
  • Current applications of 3-D printing using concrete and sustainability concepts.
    • Taylor
  • Economical Effects/Social Repercussions.
    • Grig
  • Future Opportunities
    • Concrete printing in the future?
      • Larger Scale?
    • Expanding to other materials?
  • Conclusion

My part of the project is to investigate the economical effects and social repercussions that are occurring as this technology takes off. There are many applications where it would make sense to use 3-D printing in construction, but a balance between technology and manpower is needed.

Responses:

Kevin Saldivar: I'm really interested to see how your project turns out! My freshman design project concentrated on LEED certification so I'm pretty familiar with the requirements. I find it curious that people will sometimes ignore LEED when building a new structure even with the incentives associated with building "green." A suggestion would be to take an existing "intelligent" building and give suggestions to make it greener. Good luck!

Drew Sivertsen: I know we already discussed it in class but I was impressed with just how thorough you plan to be when creating this database. It's definitely an idea I'm going to keep in mind for Senior Design next year. Can't wait to see how it turns out.

Ilana Ritvalsky: Your topic is really interesting. When I think of intelligent buildings and climate control I just think of an efficient thermostat. I didn't realize that LeBow had that technology installed and I'm definitely going to be on the look out for it next time I pass by!


B4 - Project Outline

My term project will be a research paper focusing on the use of 3D printing on project sites. More specifically, I will be researching the use of 3D printing to create custom connections at the project site. The outline to my paper can be found below. I chose to research this topic because I have some familiarity with framing connections from specifying them at work.

  • Cover Sheet
  • Abstract
    • Background
    • Purpose
    • Design/Method
    • Results
    • Conclusions
  • Brief History of 3D printing
  • Advancements in 3D printing
    • Reduction in costs for machines
    • Different materials, specifically the ability to print metals
  • 3D printing on a Project Site
    • Creating custom connections for unique situations where a standard connection (from Simpson Strong-Tie for example) may not suit a particular situation. Examples of such situations are:
      • Standard connection may not meet capacity requirements
        • Potentially print a connection that is very similar to a standard connection, though with a thicker gage to increase its load capacity
      • Standard connection may not have the correct geometry for a particular framing design
        • Print out a connection to accommodate for unique framing situations
      • Contractor did not order enough specific connections and cannot afford to wait for the part to ship or be delivered.
        • Printing is currently very slow, so this would be an added benefit with advancements in the future
    • Connection companies could create a library of standard connections for contractors to license which allows connection companies to still see a profit off of the evolution of the industry.
      • Much like AutoDesk, connection companies could license specific types of connections. For example, it would cost X amount of money to license a library of joist hanger models and Y amount of money to license a library of column cap models.
      • This could help aid the creation of unique connections by giving contractors a base model to start with.
  • Conclusion

Responses:
Lenny Knittel - The Bullitt Center is a really cool looking building and the fact that it is the only building that is energy neutral will make it a fun topic to research.

Santiago Uribe - The topic of automated home systems is very fitting for the class. Researching both the presents and future advances in the industry should be interesting.

Angelina Castro - Creating a BIM model of a proposed building is definitely going to help learn BIM/Revit in detail. While watching tutorials is great, actually putting together a model will really help learn the program and its capabilities.




Monday, February 2, 2015

B4 - Final Project Topic - Taylor Castonguay

For our final project, my team will be writing a research paper on the 3-D printing of building materials. 3-D printing is becoming more and more popular and one of the newest topics with it is the 3-D printing of materials used in the building process. The building industry is such a huge part of our economy and the 3-D printing of materials could greatly affect many blue collar workers by taking away their jobs. But, this process could greatly increase the efficiency and decrease the time is takes for buildings to be created. This could also decrease the amount of money spent during the building process.

One popular building material that already is being 3-D printed is concrete. You can visualize the 3-D printing of concrete in the figure above. In China, there have been many homes that have been made out of entirely 3-D printed concrete. They even have began making homes from recycled concrete, which I think is really awesome. The more efficient and resource saving the building process is, the more I am interested in it! I can't wait to learn more about this and the other materials that engineers and scientists are looking into for our future. One day, I believe so many other building materials will have the ability to be 3-D printed. The general outline of our project is as follows:

  • Abstract
    • Summarization of our research findings & conclusions.  
  • Introduction
    • Introduce project & idenify 3-D Printing of building materials such as concrete.
  • History
    • Brief history of 3-D printing and how it has advanced over time.
  • Topic 1: Technological aspects of 3-D printing concrete
  • Topic 2: Current applications of 3-D printing using concrete and tying in sustainability concepts
  • Topic 3: Economical Effects/Social Repercussions
  • Future Opportunities
    • Concrete printing in the future
      • Larger Scale
    • Expanding to other materials
  • Conclusion


Comments on other projects:

When I read about Ami Amegan, Zilong Xiao, and Yu-Sen Liu's project, I was very intrigued. They are creating a model of The Institute of Contemporary Art in Revit. This almost makes me wish I was working on a project in Revit because I love working with the program so much. Although I feel pretty comfortable with it now, I believe it is something that you could keep learning about forever. There are so many features to Revit and I am excited for them to become more comfortable with it, too.

Another project I found very interesting was J Schwakoff's topic about Automatic Fault Detection and Diagnosis (AFDD) of HVAC systems. Being an architectural engineering major with an HVAC concentration, this topic is very interesting to me. So much energy is lost in buildings due to faults in HVAC systems. I am a firm believer in saving a much energy as possible in buildings not only for energy costs, but to be environmentally conscious. I think that these automatic fault detection systems could be a great help in the building industry and help save a lot of wasted energy.

Dmitriy Voznyak's group is using Revit to be able to increase the detail of their senior design project. They not only are making a Revit model to display the way their building looks, but they are also going to try to incorporate scheduling, structure, and MEP. I think that this is a great way to make their senior design project better!


Tuesday, January 27, 2015

Jonathan (Yu-Sen Liu) B3 - Group C



What are the possible future advantages of Revit/ BIM?

BIM and Revit has been a great help in the design and visualization of modern infrastructure. The use of BIM programs has allowed designers to see how multiple systems interact with each other and to make connections between two 2D planes. For example, AutoCAD works primarily with 2D planes where a designer draws something on a x-y plane  for the North elevation of a building and then a separate page for East elevation for the building. Revit allows the connection between these two planes and adds a 3-Dimensional perspective on the whole building. This is something that many designers and design companies are converting to in order to become more efficient with the integration of multiple systems.

I believe that Revit is only a template of what BIM programs can become. With the integration of rising technologies such as 3D printing, 3D Virtual holographic interfaces, and motion tracking interfaces, BIM design can grow to even greater hights. Revit and other BIM programs may also allow for a more complicated designs with the use of modern product design such as structural glass that is stronger than steel and 3D printing of concrete for more complicated shapes and demands.


References:

Structural/ more durable glass:
https://www.youtube.com/watch?v=13B5K_lAabw

3D Printing Concrete:
https://www.youtube.com/watch?v=WzmCnzA7hnE

Tuesday, January 13, 2015

Blog Post - Week 2 - Group B

What are the areas of construction most susceptible to change?

We believe the fabrication of parts and small structures is most susceptible to change in terms of being able to prefabricate offsite using 3D printers. Small structures such as simple single story homes and disaster relief shelters could be rapidly produce at a significantly low cost.

We also think that robots could be capable of solving problems and performing tasks that arise on site which would otherwise put humans in direct danger. We feel that at this point robots are not reliable enough to perform non-repetitive tasks. On a construction sites, there are an incredible amount of variables that could arise that robots might not be ready or programmed to handle. Simple repetitive tasks like removing debris (potentially dangerous) and simple heavy lifting are a few things we feel they could be assigned.

B1- Group B- Grigorios Papadourakis

BIM
Building Information Modeling, otherwise known as BIM, was a topic we briefly discussed in class last week. Although I had heard mention of BIM before, I was unaware of just how complicated it can be. BIM has infinite uses: it can be used to model thermal performance of an office building or the expected energy consumption of a single family home. It can estimate the required quantities of materials needed for the construction of structures ranging from a single-story bungalow to a modern high-rise. It can pinpoint problem areas by simulating the acoustics of a concert hall, allowing the designer to change the geometry and ensure that each seat will have a satisfactory listening experience.  Positioning a structure in a certain way on the chosen location can maximize natural lighting. At the end of the day, parametric modeling and BIM allows designers to make the building process as efficient as possible. It especially reduces the amount of work associated with making minor changes to a model.



3D-Printing
One of the biggest challenges when trying to 3-D print something is planning the way to print it out. Figuring out how to print models with complex geometries can take longer than designing the model itself.  That said, strides are being made everyday to quicken this process. One unique application is that of the Boston-based company Nervous System. Nervous System came up with the idea of printing relatively flat designs with built-in hinges that would allow parts to be folded into more impressive geometries. They used their philosophy in the creation of 3-D printed jewelry and other fashion accessories. This technique allows designers to create unique and complicated designs that are fairly easy to produce. I would venture to say that this technique could be used in the construction of 3-D printed structures in the future. If one were to print four walls connected by hinges flat on the ground, the result could easily be stood up and folded into a box-like structure.  A roof could be printed in a similar fashion. All in all, 3-D printing technology today has progressed enough that printing temporary to semi-permanent dwellings would not be all that difficult.


Structures
Forensic Information Modeling, or FIM, is a new tool being used to evaluate the causes behind the collapse of structures. It compiles a vast amount of data, including blueprints, renovations, and maintenance data into a three-dimensional database that allows people to analyze structural failure. This is an excellent technology for agencies such as the NTSB, but I personally believe that more effort should be put into the planning and design stages of a building. It’s better to be 99% sure there will never be a problem with a building that 99% sure you can figure out what went wrong when it fell down.


Future
I had already seen the movie “Her” when I read Greg Egan’s review of it. The movie centers on a lonely man who fosters a relationship with a computer program. Despite not having a physical connection, the two become quite emotionally attached (at least in the guy’s case). Egan believes that the probability of similar technologies being developed is slim for now. “Artificial Intelligence” similar to the example shown in “Her” is limited to applications like Siri, who, despite an occasional witty retort, is strictly utilitarian. People used to believe that reading books made people unsocial. Today many complain that texting instead of calling someone is antisocial. It would seem that as technology advances we become more and more independent. I do believe that we have lost some aspects of sociability with modern technology, but I also think we have gained some. Websites like FaceBook and applications like Skype allow us to remain in touch with the people in our lives that would have otherwise drifted away. Just last week I hung out with some high school friends that I hadn’t seen since graduation. Thanks to modern technology I’ve been able to keep up with them through the years so we had something to talk about and it wasn’t awkward when we met up in real life. I think that technologies like “Her” could be developed in the future as entertainment, but I personally don’t believe that we will ever be able to foster legitimate relationships with computers. Human emotions are too intricate to be understood by a program.

B1 Group C Lewis

Robotics:
Robots that aid in the performance of day-to-day tasks have always been a major goal of research, but until recently the costs of robots made them prohibitively expensive to the general public. However the price of robots keeps falling as they become easier to design and produce, and the market has seen an increase in the amount of small robots for domestic use. Some of these robots are still outside of the price range of the average consumer—such as a robot that mows your lawn, for a price of $1,100 to $2,000—but others are well worth the amount of money that the consumer would spend on it, such as a robot which rocks a baby to sleep for $180. However, these robots still do need a certain amount of human intervention to perform their tasks. As Kevin Saldivar said, “The machines and robots we have now are capable of completing the tasks that any human may instruct it to do, but it may require constant attention and correction by the human in control.” As robots get smarter this issue may be resolved but for the time being in many areas it is more efficient to have a human perform the task rather than develop and program a robot to do it.

AI:
As robots become more intelligent and perform more and more tasks, it comes to the point where robots will be required to make ethical decisions on par with a human’s morality. A good example of this already in prototype stage is a driverless car, which has to make decisions about driving in which there is no good choice, such as preventing an accident. Scientists are optimistic that robots will be able to have the morality required to make these sorts of decisions.

3d Printing:
Last year the field of 3D printing has become more mainstream as more and more items have been printed that previously would not have been printed. For example, recently a dress was assembled using parts that were designed in a computer and printed using a 3D printer. One of the biggest challenges faced by the team was developing a 3D printed fabric that behaved like fabric though its folds and flowing behavior.

Future:
These subjects are all important for uses beyond the almost trivial uses that they are currently used for as explored in the articles. The developments from these articles can be used on more important uses in the future, once the issues are worked out and the cost of these technologies makes them more accessible to the general public.




Week 2, Group C Blog post - Jonathan Yu-sen Liu

AE 510 – Assignment 1 Blog Post
Group C

Topics discussed in class:
                In Class, students discussed the meaning of intelligent technology and how they are applied into modern infrastructure. A video Professor Mitchell had shown to the class demonstrates humans who have programmed quad copter drones to carry and place building blocks to form a structure. Students in the class believed that this type of technology represents one of the most modern and wide spread form of technological intelligence that can be easily applied into architectural infrastructure.

Robotics:
The Robotification of Society is Coming
[Shared Evernote Notes]
http://www.wired.com/2015/01/robotification-society-coming/   

Response/Reflection:
                The concept of "Robotification" has been in effect for quite a while where machines are completing human tasks with higher accuracy and efficiency. This article also adds the question "Are robots going to take my job?".  Although the replacement of human labor with mechanical muscle, this makes lives easier for humans and changes the economic industry. Baxter, a learning robot, is programmed to learn from human actions and mimic them. In the video, "Humans need not apply", the presenter shows the many different types of modern technology that can one day easily replace human labor and job. Like that of the horses back in the early 20th century, automobiles put the horses out of commission without any fault from the horses since they just could not be used. The video explains the importance of economics and how effective it is when battling against the working population. Although workers and laborers may lose jobs and the ability to contribute a large portion to the development of the human world, I don't think that that will cause humans to die out. I believe that there will be more jobs available to humans after the roboticization of jobs. I also think that there will be some benefits that are not yet clear to us yet. There may be the possibility that we may become those robots or integrate robotics into humans physically. 

AI:
What Artificial Intelligence is not.
http://techcrunch.com/2014/12/13/what-artificial-intelligence-is-not/?ncid=rss&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Techcrunch+%28TechCrunch%29

Response/Reflection:
                This article addresses the many different misconceptions or concerns that many popular ideas have come across. Some for example include a "omnipresent war machine" destined to destroy human advancement like HAL9000 and Skynet. This article illustrates a different perspective towards the complexity and advancement of Artificial intelligence. Although there are still a large amount of debate within the scientific community, the concept that AI will wipe out human existence is certainly not part of it. AI is defined within this article as a system capable of accomplishing tasks that are otherwise preformed by humans with higher accuracy and performance. I agree with the concept that AI may not be a threat to human existence. There are many concerns that the modern populous has but I don't think the we are at a point yet that we need to recognize robots as a living entity that will feel threatened by our existence. AI advancement may actually increase the benefit of humans with the use of higher efficiency. 

3D Printing:
The Internet of Anything: The 3-D Printer that can spin out custom electronics.
[Shared Evernote Notes]
http://www.wired.com/2015/01/internet-anything-3-d-printer-can-spit-quadcopter-parts/

Response/Reflection:
                3D Electronics is the newest form of 3d Printing. Circuitry in a physical from has been developed and has been integrated into mechanical systems with the use of conductive ink. An example for this new form of technology includes a 3D Printed quad copter with complete functions right after printing was completed. This form of technology can advance into something that will make design and production more efficient and advanced. I think that 3d printing is still in it's infant stage and that there it will require much more improvement to be able to have a large impact in the advancement of our world. Accomplishments such as printing a functioning heart or human organ is a enormous step towards technological advancement. I think 3D printing can help with specific and complex situations.

Future:
Google Tracker 2015: Everything we know Google is working on for the new year.
[Shared Evernote Notes]

Response/Reflection:
                This article lists the many goals that Google has in store for the near future. From things such as home automation to improvements to the self driving cars. Nest is Google's Home automation division, originally a smart smoke detector, that has plans to expand to become even greater. Nest plans to expand to become a smart thermostat that can control and adapt to different situations such as alarms, automated temperature change based on when the homeowner is asleep or away from home.  One example the  new Nest  system is being able to detect when the home owner is on his or her way home and preheat the house temperature accordingly so that when the owner arrives, the temperature will be at the optimum comfort.  This long list of goals from Google is another step into the future as a collection of many things that have a great technological potential. I enjoyed this article because it showed the many different possiblities that technological advancement may occur. I think that this kind of advancement is amazing and it is wonderful to see what an individual or a team can accomplish. 

Responses:
To Kevin Saldivar:

At first, I agree with you about your comment that 3D printing wouldn't be very effective in our modern world since the assembly line and cheap manufacturing is so easily accessible. But I recently came across an article about 3D printing circuits while printing an physical object at the same time. The integration of electronics into 3D printed objects seems much faster and prototypes can be easily made quickly and efficiently. 3D printing seems very arbitrary when mass production but when it comes to design and prototypes, 3d printing can allow for major or minor adjustments to specific and complicated designs. In this case, the electronics are essentially woven into the production of the object and can preform perfectly after production. This may be a key into smaller and smaller scaled product designs that might allow for more things like a more complex microchip or maybe 3D printed skin that can act as replacement for the skin (just an idea).

To Ami Amegan:
I think right now, we can see that there are many problems that can occur for human workers from the development of automated technology, but something that we don't see is what technology can benefit. I was watching a video about the future of robotization applied modern jobs and how it can actually save lives. One example is an automated doctor that will allow for a more accurate diagnosis of diseases and to prescribe the proper medication that doesn't interfere with other types of medication that may potentially pose as deadly. Yes I agree that it will make human lives more complicated, but it also makes our lives easier. I agree with Liang about the two sided argument and that this is another thing that we must adapt to. I don't think that the advancement of technology will stop or slow. Advancement of robotics is inevitable. It is something that we have learned to rely on. I don't think "Laziness" will increase within the human race, but will actually decrease as technology pose as a challenge for humans to become better than robots and will push us as a race to accomplish greater things and discovering more complex topics. Another thing I think will happen will be the harmonic advancement of humanity and technology together into something greater that we don't yet understand or see.

To Anthony Yau:
I don't think robots are perfect, but they are definitely on the track to becoming better than us. Robots are more efficient and require less resources then humans and would naturally be a better option in terms of accomplishing a task. Humans get tired and need extra resources like food and sleep that can jeopardize the quality of the product. I think this might be a good thing. Although we are replacing people from their jobs, it's more effective when people's lives are on the line.